VIBDAQ 16.1 - 16-channel data acquisition system
VIBDAQ 16.1 is a 16-channel data acquisition system for signal processing in IEPE standard. Fully managed from a PC computer.ype your paragraph here
VIBDAQ 2.1 - 2-channel data acquisition module with configurable gain
VIBDAQ 2.1 is a dual channel data acquisition module for signal processing in IEPE standard. The device has configurable gain for each channel, as well as the signal overload indicator, it is also fully powered from USB port
VIBDAQ 2.0 - Dual channel data acquisition module
VIBDAQ 2.0 is a dual channel data acquisition module for signal processing in IEPE standard. Fully powered from USB port
VIBDAQ 4.1 - 4- or 8-channel data acquisition system
VIBDAQ 4.1 is a 4- or 8-channel data acquisition module for signal processing in IEPE standard. Fully powered from USB port.
PA 3000 - Triple channel conditioner
A portable conditioner for ICP® signal with built-in battery pack. Each channel has an independent control of gain level and frequency response. Settings can be adjusted by buttons on the front panel. The module has built in sensor circuit diagnostics and detects short and open circuits in the measurement chain..
PA 16000D - 8/16 channel conditioner
Excellent solution for both educational and laboratory purposes. Ruggedized housing, keyboard and big legible display enable for a quick and easy configuration of the system. The signal conditioner is adapted to external control via RS232 interface.
PA 1000 - Single channel conditioner
PA 1000 is a single channel, portable conditioner for ICP® signal with built-in battery pack. The conditioner is equipped with 2.4mA/24V power supply for IEPE (ICP®), and with a special input circuit for gaining optimal transitional performance.
Copyright © Techmantiq Envision Pvt. Ltd. All rights reserved